Setting up a Brick Paver Walkway or Refractory Brick Cutting Machine

The use of Bricks or Pavers to create a walkway or patio complements a house in a method that is unrivaled. In addition, installing a Brick or Paver pathway does not always need a pro.

The secret to setting up a Brick or Paver Walkway is to very first effectively prepare the location where the bricks/pavers are to be set up. The area ought to be removed a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines should be strung on each side of the sidewalk. The string lines suggest the finished height of the sidewalk.
When the location has actually been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline should equal the thickness of the brick or paver.

Now that you have a stable base, put a 1" pipeline or journal board the length of the sidewalk on either side of the pathway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared location. These strips will act as your sidewalk border and assistance to maintain the stability and shape of the walkway.

When this is done, you can then begin to lay the bricks/pavers. There are lots of patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to make sure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again help keep the integrity of the pathway.

Inevitably bricks/pavers will require to be cut or divided when constructing the sidewalk. To in fact cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the spot where you want to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop up the outside edges with additional sand, and after that shovel in the topsoil and load down securely.
Spread stone dust over the new sidewalk and sweep into the cracks. This will complete the interlocking of the bricks and help to get rid of any weed growth.


In addition, installing a Brick or Paver pathway does not always need a pro. The secret to setting up a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers read more are to be set up. Now that you have a stable base, position a 1" pipe or ledger board the length of the sidewalk on either side of the walkway. These strips will act as your walkway border and aid to maintain the integrity and shape of the pathway. Inevitably bricks/pavers will require to be cut or split when developing the walkway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Setting up a Brick Paver Walkway or Refractory Brick Cutting Machine”

Leave a Reply

Gravatar